Hydraulic Swing Clamp Botton Flange
Introduction of product
◆It is not necessary to manufacture hole for the installing and you just need to use bolt to fix the
swing clamp on the fixture plate. It is helpful for you to clamp thick workpiece because the
main structure of the cylinder body is on the fixture plate.
◆Feature of the doubling acting type. Oil circuits control clamping and un clamping, you can
control the clamping and unclamping by changing the direction value.
◆Feature of the single acting type. The design of the interior system is simple. It is not necessary
to design for unclamping. It can return back to original position by spring and the system design
is simple because of few accessories.
◆The material of the cylinder body is carbon steel and treated by nicarbing. The hardness of the
outside and inside surface of the cylinder is high and the cylinder is antiabrasive.
◆Please don't exceed 1.5 times of the original length, if you need to increase the length of the
clamping arm.
